Manufacturing Processes // Classroom Project

Edit

7b6d3534693651.56d9d159aab48

1 likes

416 views

0 members

ABOUT

 
 
 
 
 
Brief: To design a receptacle that can be injection molded, having a sheet metal part with a meaningful function.

My product works on a simple mechanism inspired by the shutter of a  camera lens. It is an alternative for sealer clips used to make plastic packets air-tight. The four shutters, due to their to and fro motion because of cam action seal the packets between them from all sides. Its form reselmbles a toroid that encloses the shutter mechanism in its hollowness.
 
Note: This project exhibits my abilities to understand and develop complex designs and incorporate and validate the same for mass manufacturing processes. Such a complex product is not viable for a simple function like sealing plastic packets.
 

Injection molding process.

 
 
Injection molding process
 
 
 

Injection molding process.
 
 
 

3-D Printed functional prototype. The Cams and the Track have been lasercut on Acrylic sheets.
 
 
 
 
 

 
 
 
Thank you! :)
Feedback is appreciated

CREDITS

3fda0434693651.56dc8252a00e1
2d8bd334693651.56d9d159ab1ec
20b6d234693651.56dc7a992fffa
528fd834693651.56dcc556c0083
47db8234693651.56dabd4172067
A693c834693651.56dcc556c07b8
8dccd834693651.56dcc556c0f24
3068b834693651.56dcd8ba84fd1
B26c5b34693651.56dcd384e30cb
A06ae634693651.56dcd8ba84a99
68b98134693651.56dca9bff0cf7
0ca7d934693651.56dd73917c0f5
410a6d34693651.56df247a10a32
Fbbfc834693651.56df247a111f9
1d8a6634693651.56dc786c600ee

0 COMMENTS

Comment
Close popup w
Close popup
Close popup